We offer a no cost, informative and no pressure estimate to all of our clients. A knowledgeable technician will come to your home, gather measurements for a load calculation, explain equipment, payment options and answer any questions or concerns you may have.
Serenity customers choose this to schedule their pre-paid maintenance visit.
Includes trip charge and complete diagnostic of your heating system as well as a safety inspection.
Our comprehensive heating maintenance is recommended for systems that we have not serviced or maintained in the past. Typically the following tasks will be performed: Inspect Thermostat Perform Furnace Cycle Temperature Rise Test Inspect / Replace Air Filter* Humidifier Maintenance* Inspect Vent System Gas Leak Search (Furnace Drop) Inspect Safeties Inspect Igniter / Pilot Clean Flame Sensor Inspect Burners and Orifices Inspect Blower Wheel Test Blower Motor Run Capacitor Inspect Blower Motor Inspect Inducer Assembly Inspect Electrical / Testing Inspect Heat Exchanger Inspect / Clean Pressure Switch /Tubing Clean Drain Trap and Tubes Inspect / Flush Drainage System Remove and Clean Burners Duct work Pressure Test Check / Adjust Manifold Pressure Check / Adjust Blower Speed Pre and Post Combustion Test *Billed Additional (May qualify for $50 Consumers or DTE Energy Rebate)
Our standard heating maintenance is recommended annually in order to ensure that your system is operating safely and efficiently. The following tasks will be performed: Inspect Thermostat Perform Furnace Cycle Temperature Rise Test Combustion Test Inspect / Replace Air Filter* Humidifier Maintenance* Inspect Vent System Gas Leak Search (Furnace Drop) Inspect Safeties Inspect Igniter / Pilot Clean Flame Sensor Inspect Burners and Orifices Inspect Blower Wheel Test Blower Motor Run Capacitor Inspect Blower Motor Inspect Inducer Assembly Inspect Electrical / Testing Inspect Heat Exchanger Inspect Pressure Switch / Tubing Clean Drain Trap and Tubes Inspect / Flush Drainage System *Billed Additional
Includes replacement of pad, cleaning / wiping cabinet, flushing drain, testing operation. (Available pads - #10, #12, #35, G 990-13, G 1099-20)
Includes trip charge and complete diagnostic of your cooling system as well as a operational testing.
Our comprehensive cooling maintenance is recommended for systems that we have not serviced or maintained in the past. The following tasks will be performed: Inspect Thermostat Cycle System Inspect / Replace Air Filter* Inspect / Replace Humidifier Pad* Inspect Blower Motor and Wheel Test Blower Motor Run Capacitor Inspect and Flush Condensate Drain Line Clean Condenser Coil From Outside** Inspect Disconnect & Wiring Inspect Contactor Test Fan Run Capacitor Test Compressor Run Capacitor Inspect / Test Start Capacitor and Relay Test Temperature Drop Across Coil Static Pressure Test (Pre) Adjust Blower Speed Test Electrical Consumption (Pre) Inspect Evaporator Coil Remove Debris & Clean Inside Condenser Clean Condenser Coil From Inside** Test Electrical Consumption (Post) Temperature Drop Across Coil (Post) Static Pressure Test (Post) Calculate Pre and Post Air Flow Check Refrigerant Charge*** Calculate System Efficiency
Our enhanced cooling maintenance is recommended annually in order to ensure that your system is operating safely and efficiently. The following tasks will be performed: Inspect Thermostat Cycle System Inspect / Replace Air Filter* Inspect / Replace Humidifier Pad* Inspect Blower Motor and Wheel Test Blower Motor Run Capacitor Inspect and Flush Condensate Drain Line Clean Condenser Coil From Outside** Inspect Disconnect & Wiring Inspect Contactor Test Fan Run Capacitor Test Compressor Run Capacitor Inspect / Test Start Capacitor and Relay Test Temperature Drop Across Coil
Includes flushing tank, testing of relief valve, safety inspection and operation test.
Includes flushing tank, testing of relief valve, safety inspection and operation test. Requires isolation valves.