Did you know that a buildup of lint in the dryer vent pipe is the leading cause of fires in the homes’ laundry area? Dryer Vent Cleaning: Clean entire vent ductwork to exterior port, with brush agitation and high-powered vacuum.
Clean and Remove debris from rain gutters.
Remove old mailbox if applicable, plumb and set post in concrete, install new customer provided mailbox. (Mailbox can be provided for an additional fee)
Repair damaged drywall area and patch to a smooth finish. Up to 20in x 20in. Texture, prime and paint is additional and will be billed separately.
Prime and paint already paint prepped handrails. Installation and repair, fill and sanding is additional and will be billed separately.
Remove door (if required) stencil and cut door install customer supplied pet door hardware. Reinstall the door.
Remove existing fan, clean installation surface, and install new customer provided fan. (Drywall Repair, Electrical Reconfiguration, and Exhaust Ductwork is additional and will be billed separately)
Install new customer provided Bathroom fan assembly. (Drywall Repair, Electrical Reconfiguration, and Exhaust Ductwork is additional and will be billed separately)
Remove existing fixture, clean installation surface area, install new customer provided light fixture.
Remove existing fixture, clean installation surface area, install new customer provided light fixture.
Remove existing chandelier, clean installation surface area, install new customer provided chandelier.
Remove existing 15Amp outlet, clean installation surface area, install new 15Amp duplex outlet.
Remove existing 15Amp outlet, clean installation surface area, install new 15Amp decora outlet.
Remove existing Switch, clean installation surface area, install new standard light switch.
Remove existing ceiling fan, clean installation surface area, install new bracing device and customer provided ceiling fan.
Remove existing ceiling fan, clean installation surface area, install customer provided ceiling fan.
Demo existing light box and trim clean up and repair existing drywall, correct texture, prime and paint surface. Install up to (6) 6-inch recessed LED light fixtures. (Up to a 4ft x 6ft space)
Install customer provided TV (up to 65inches) using provided tilting mounting bracket. (Wire concealment and electrical outlet is additional and will be billed separately)
Remove existing faucet, cleaning installation surface, and install new customer provided faucet.
Remove existing faucet, clean installation surface, and install new customer provided faucet
Remove existing Garbage Disposal, clean installation surface area, install new customer provided Garbage Disposal. (Electrical Card, Hoses, or additional parts Needed for the installation is additional and will be billed separately)
Remove Old shower head, clean installation surface, and install new customer provided shower head.
Remove existing angle stop valve, clean copper pipe, prepare the copper pipe for new angle stop valve, and install new compression angle stop valve.
Remove existing shower valve cartridge, clean installation surface, install new cartridge.
Remove the P-Trap and Sink Stopper to clear the clog and reassemble and check for leaks.
Drain and remove existing water heater unit, clean installation surface, prepare piping for new installation. install new customer provided water heater. (New Installation kit will need to be purchased at the time of installation for $79.99) does not include shut off valve replacements.
Drain tank, remove existing fill valve, inspect toilet tank, reinstall new provided fill valve. Yeast for operation and check for leaks.