Woods Handyman Pricing Options
We Now Offer Instant Booking!
Step 1
Choose Services
Review the instant booking options below and select the one service you'd like to book. Prices may vary depending on job conditions and complexity of repair. Adjustments can be made on site or during schedule confirmation call. (This is an estimate not a firm quote)
Step 2
Pay Reservation Fee
Add the service and choose the time that works for your schedule. Pay a $50 reservation fee for each of the service (that will go towards your final bill). non refundable if you cancel.
Step 3
Confirm Booking
Our team will review your booking and confirm time and location will work for our techs . Once confirmed, you'll get a booking email.
If we need to adjust the scheduling do to tech availability or time needed to complete job , our team will be in touch to make adjustments.
Step 4
Repair & Enjoy
Our techs will come, complete your repair work and a final invoice will be due at the end of the job.
-
To do list items
-
Bathroom
-
bathroom faucet replacement/installationFull Job: $296. plus tax | $50 reservation fee customer to supply faucet Installation of a new faucet for kitchen or bathroom Turn off water at under sink valves and verify their operation. Remove existing faucet fixture, install new fixture per manufacturers specifications. (Exclusions) Does not include the cost of the faucet Supply hoses or replacement water shut off valve replacement if required. Labor only
$296.00/each -
Bathroom Fan with Light Install (we buy fan) - R&R | $500 LaborFull Job: $500 | $50 reservation fee. cost of fan added to bill. Remove and replace modern style bathroom fan with light using standard techniques. Scope of work to include cutting out ceiling location to adapt to slightly larger dimensions if required. Attaching to existing ducting and electrical at location included. (Exclusions) Rerouting of ducting, running new electrical, drywall repair, or painting is not expected and if required, is a separate charge. (bid rate) Labor only 240 Mins
$500.00/each -
Bathroom Fan motor replacement -(customer supplied) R&R | $296.00Full Job: $296.00 | $50 reservation fee *customer to supply bathroom fan . Scope of work to include removing and replacing fan with new motor and cleaning housing and duct. (Exclusions) Rerouting of ducting, running new electrical, drywall repair, or painting is not expected and if required, is a separate charge. (bid rate) Labor only 180 mins.
$296.00/each -
Toilet R&R | $500Full Job: $500 | $50 reservation fee Remove previous toilet and install new customer supplied toilet with standard techniques and processes. Ensure supply line is connected and not leaking. Replacement of supply line and water shut off valve is not expected and if required is a separate charge. Disposal of previous toilet included in scope. (Bid Rate)Labor only 240 Mins. exclusions, replacing rusted water closet flange and rotted sub flooring.
$500.00/each -
Toilet - Wax Ring ReplacementFixing a loose toilet due to a faulty wax ring. This includes the wax ring, but not replacement of water shut off valve if necessary. Full Job: $296.00 | $50 reservation fee Remove and reinstall the toilet using a new (NSHM-supplied) wax ring. Install using standard building techniques and processes. Verify ""rock free"" operation. It does not include modifications or repairs needed in case of a damaged toilet, floor, waste flange, or water valve or supply hose replacement if defective. Labor and material 120 Mins.
$296.00/each -
Re-Caulk Shower/Tub Combo | $500Full Job: $500 plus tax | $50 reservation fee Includes the labor and materials to re-caulk the shower/tub Remove and replace caulking/siliconized grout common to shower and bathtub perimeter. Install using standard techniques and processes with locally available product of similar color to match original product. Scope of work includes 2 vertical shower corners & shower floor, as well as the perimeter of the bathtub up to 25 linear feet. Grout R&R, repair, and/or permanent marks from long term mold are a separate charge to repair if required. Labor only (bid rate) 240 Mins.
$500.00/item -
Toilet Rebuild | $300Full Job: $300 plus tax | $50 reservation fee Remove and replace tank gasket, fill and flush assemblies. Reconnect water, adjust fill rate and height, and verify leak free operation. Labor and materials 120 Mins.
$300.00/each
-
-
Sheetrock repair
-
Small Dings and Nail holesFull Job: $250 plus tax | $50 reservation fee Up to 10 locations for small dings (under 1"") and nail hole patches. Up to 10 locations. Touch up paint Additional, customer provides paint. (Bid rate) Labor Only
$290.76/total -
Drywall patch - SMALL - (w/o paint) | $385Full Job: $385 plus tax | $50 reservation fee For up to 3 sections smaller than 4inch in diameter Repair up to 3 damaged drywall sections using a combination of patching materials and quick set joint compound. Texture to match existing surface. Painting if required is a separate charge. Labor and materials 120 Mins
$385.00/total -
Drywall patch - MED -$650.00 + (w/o paint)Full Job: $650.32plus tax | $50 reservation fee One patch sized from 2'x2' up to about 3'x3' Remove and replace a section of drywall. Repair damaged drywall using a combination of patching materials and quick set joint compound. Texture to match existing surface. painting if required is available but a separate charge. (Labor Only)
$650.32/total -
Drywall patch - LG - (w/o paint) | $750.00 - $950 + Labor onlyFull Job: $750 - $950.00 plus tax | $50 reservation fee, Remove and replace a section of drywall. (Typically 3' X 4' and larger, cost will go up depending on size) Repair damaged drywall using a combination of patching materials and quick set joint compound. (out side and inside corners will add to labor cost). Texture to match existing surface. May require multiple visits and time slots. painting if required is available but a separate charge. Labor Only (bid Rate)
$750.00/item
-
-
Bathroom/any room
-
Grab Bar InstallationThis is for one new grab bar installed anywhere in your home in masonry, tile or existing structure. *Customer to provide grab bar Full Job: $375 | $50 reservation fee 180 minutes
$375.00/total
-
-
Interior work
-
Ceiling Fan R&RProject Description: Remove existing ceiling fixture or ceiling fan and install a new customer-supplied ceiling fan in the same location, ensuring proper support, safe electrical connections, and compliant installation. ✅ Included in This Scope Shut off and verify power to existing circuit Remove existing ceiling fan or light fixture Inspect existing electrical box for fan-rated support (Install ceiling fan–rated box if included in estimate) additional cost $150.00 Assemble and install customer-supplied ceiling fan Secure fan to framing per manufacturer and code requirements Connect existing wiring (fan, light kit, ground) Install down-rod or flush mount as applicable Balance fan blades (if required) Test fan operation (all speeds, light function, remote/wall control) Clean up work area and remove job-related debris (Not Included Unless Specifically Listed) New fan rated ceiling mounting gang box New electrical circuits or panel work Running new wiring beyond existing box location Wall switch additions or relocations Smart fan setup or Wi-Fi integration Drywall repair, texture matching, or painting Structural framing modifications beyond fan-rated box install Permit fees (unless required and noted) Ceiling fans or accessories not supplied by contractor 📐 Assumptions Existing wiring is in serviceable condition and code-compliant Ceiling height is standard (up to 9 ft) unless otherwise noted Installation location is accessible and free of hazardous materials Fan is compatible with existing electrical supply and mounting method 💬 Additional Work Any additional labor, materials, or repairs discovered during installation that fall outside this scope will be communicated and approved by the customer prior to proceeding and billed separately.
$300.00/each -
Interior Door R+R | Single Pre-hung Labor only| $300.00Full Job: $300 plus tax | $50 reservation fee 📋 Scope of Work – Interior Pre-Hung Door Replacement, hollow core. (Contractor can supply door at extra cost.) Woods Handyman Service will: Remove existing door slab and jamb Remove casing/trim carefully (salvage if reusable when possible) Remove nails/shims Inspect rough opening for damage or out-of-square framing Installation of Pre-Hung Door Set new pre-hung unit into rough opening Shim and level hinge side Plumb jamb Secure frame to framing members Check reveal margins Adjust for smooth swing and latch alignment install all Hardware Install customer-supplied knob or lever set Adjust strike plate Ensure proper latch engagement Trim Reinstall existing casing OR install new customer-provided casing (Install new casing) (both sides) Nail and secure trim Minor nail hole fill (no full caulking/painting included) Final Adjustments Test swing Ensure even margins Ensure door closes properly without rubbing ( Exclusions Not Included) Drywall repair beyond minor touch-ups Structural reframing Painting or staining Custom door resizing Specialty doors (barn, oversized, fire-rated, etc.)
$300.00/each -
Interior Doors R&R | Double Prehung | $768.00Full Job: $768.00 plus tax | $50 reservation fee Install customer supplied pre-hung paint grade double door assembly into rough opening of wall indicated location. Install level and plumb as structure allows using standard build techniques. Reinstallation of existing trim or new trim if required is included in scope. Door delivery, additional framing, or painting is not expected and if required is a separate charge. (bid rate) (labor only) 360 Mins. ( Exclusions Not Included) Drywall repair beyond minor touch-ups Structural reframing Painting or staining Custom door resizing Specialty doors (barn, oversized, fire-rated, etc.)
$768.00/each -
Blinds/Curtains Installation (3 sets) Labor onlyInstallation of customer provided blinds. For up to 3 sets of blinds Full Job: $296 plus tax | $50 reservation fee 120 Mins. (I can supply blinds at an extra charge for time and materials)
$296.00/total -
Blinds/Curtains Installation (6 sets)Installation of up to 6 sets of blinds. Customer will provide the new blinds Full Job: $500 plus tax | $50 reservation fee 240 Mins.
$500.00/total -
TV Mount (up to 60 inch TV) $296.Full Job: $296.00 | $50 reservation fee customer to supply tv mount Installation of TV mount in customer-indicated location. Install using standard techniques and manufacturers' specifications. Install using a customer-provided mount. (Bid rate) Labor only ( Exclusions; does not include wiring or new behind the tv power box, Or fishing cables through wall)
$296.00/each -
Light Fixtures R&R (up to 2) | $296Full Job: $250 | $50 reservation fee customer to provide fixture(s) Remove and replace up to two light fixtures with new unit using standard techniques. Drywall repair or paint is not expected and if required is a separate charge. Bid rate. Labor only 120 Mins.
$296.00/total -
Door Adjustment (up to 2 doors) | $296.00Full Job: $296 | $50 reservation fee Pricing is for up to two doors Verify jamb is securely attached at door perimeter. Check and re-secure hinge screws. Tune screws and hinge clearance as needed. If sticking is due to incorrectly sized gap, remove and plane/sand door edge. Touching up door finish, if needed, is extra. (bid rate) Labor only 75 Mins.
$296.00/total -
Stairway Light Fixture R&R | $375Full Job: $375 | $50 reservation fee customer to provide fixture(s) Remove and replace existing over stairway light up to 14 foot in height with customer supplied replacement. Replace using standard high height adjustable ""A"" frame ladder. Scaffolding, bracing, or additional safety systems if required are a additional cost and are not expected. Labor Only (Bid Rate) 180 Mins.
$375.00/each -
Painting 1 room (12 by 12)Basic (labor only) $958.00 to paint rooms with favorable site conditions. - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls, Vaulted ceiling add $250. Paint up to 2 door slabs, and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. (Two tone and three tone extra cost)( walls only $429.00)
$958.00/total -
Dryer Vent CleaningBasic labor to clean dryer vent with favorable site conditions. Disconnect vent line. Brush and vacuum all debris from inner surfaces of vent line, dryer vent and exhaust line and dryer. Reconnect and verify proper venting. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup.
$296.00/total -
Furniture Assembly (3 hours min service fee $290.76) each additional hour $96.92.Scope of Work – Furniture Assembly 1. Description of Work Contractor shall provide labor and standard hand tools to assemble customer-provided furniture according to the manufacturer’s instructions. Furniture must be new, unassembled, and include all required hardware and instructions unless otherwise agreed in writing. 2. Included Services The following services are included unless noted otherwise: Unboxing and inspection of furniture components Assembly of furniture per manufacturer instructions Tightening and leveling of assembled items (as applicable) Basic placement of assembled furniture in the intended room Removal of light packaging debris (boxes, plastic, foam) 3. Excluded Services The following services are not included unless specifically listed and priced separately: Wall mounting or anchoring to studs Electrical, plumbing, or structural modifications Disassembly or relocation of existing furniture Disposal of large cardboard or bulk trash Repairs to damaged, defective, or missing parts Custom modifications or non-manufacturer assembly methods 4. Client Responsibilities Client agrees to: Provide clear access to the work area Ensure all furniture, parts, and instructions are on-site Identify final placement location prior to assembly Disclose any known defects, damage, or missing components Delays caused by missing parts or inaccessible work areas may result in additional charges. 5. Time & Pricing Work is billed per item, flat rate, or hourly, as stated on the estimate A minimum service charge may apply Additional time required due to complexity, missing hardware, or incorrect instructions will be billed accordingly Payment is due upon completion of services
$290.76/each -
Standard Switch/Outlet Install (up to 4) | $375Full Job: $375 plus tax | $50 reservation fee customer to provide switches R&R of the existing electrical switch. Install using standard build techniques and processes. Modification of junction box or electrical wiring is not expected and if required is a separate charge (bid rate) labor only 180 Mins
$375.00/total
-
-
Kitchen
-
Faucet Installation | $296.00Full Job: $250 plus tax | $50 reservation fee, customer to supply faucet Installation of a new faucet for kitchen or bathroom Turn off water at under sink valves and verify their operation. Remove existing faucet fixture, install new fixture per manufacturers specifications. (Does not include the cost of the faucet or replacement of water shut off valves or supply hoses, if replacement is required extra cost will be applied). Labor only
$296.00/each -
Range Hood Remove and Replace | $296.00Full Job: $296.00 | $50 reservation fee. Remove and replace existing range hood with customer supplied replacement of same size and fit. R&R existing microwave or range hood with new range hood supplied by customer. Includes removal and disposal of old unit and installation attaching to existing ducting. Routing new ducting to exterior, wall/tile repair, or painting is a separate charge if required (not expected). Labor only (bid rate)
$296.00/each -
Garbage Disposal - R&R | $296.00Full Job: $286.00plus tax | $50 reservation fee customer to supply garbage disposal. (Contractor can supply disposal at extra cost) R&R garbage disposal in existing sink with customer provided unit. Install using standard techniques and practices to existing plumbing and electrical connections. (Bid rate) Labor only 150 Mins. (Does not include replacing or repairing connecting drain pipes or blockages in plumbing)
$286.00/each -
Replace Cabinet Drawer slides, includes slides (Minimum service fee 290.76)(minimum 2 drawer slide replacements)$50.00 reservation fee. Remove existing failed or damaged drawer slides and replace with new functional slides to restore smooth drawer operation. ✔ Included in Scope Remove drawer from cabinet box Remove existing drawer slides (cabinet and drawer side) Inspect drawer box for damage or misalignment Install new drawer slides (side-mount or bottom-mount standard slides) Align and level drawer for smooth operation Test open/close function Minor adjustments as needed ❌ Not Included (Additional Cost May Apply) Drawer box rebuild or structural repair Face frame modification Soft-close premium upgrades (priced separately) Custom carpentry or resizing drawer Replacing broken drawer fronts Remove existing failed or damaged drawer slides and replace with new functional slides to restore smooth drawer operation. ✔ Included in Scope Remove drawer from cabinet box Remove existing drawer slides (cabinet and drawer side) Inspect drawer box for damage or misalignment Install new drawer slides (side-mount or bottom-mount standard slides) Align and level drawer for smooth operation Test open/close function Minor adjustments as needed ❌ Not Included (Additional Cost May Apply) Drawer box rebuild or structural repair Face frame modification Soft-close premium upgrades (priced separately) Custom carpentry or resizing drawer Replacing broken drawer fronts
$135.00/each -
Fix Falling sinkKitchen Sink Re-Securing & Support Repair Scope of Work (Flat-Rate Service) Woods Handyman Service – Salt Lake City, Utah Overview Provide labor and materials to properly re-secure a loose or falling kitchen sink (undermount or drop-in), restore structural support, and ensure safe, long-term stability. Scope Includes 1. Inspection & Preparation Inspect sink mounting type (undermount, top-mount, farmhouse) Identify cause of failure (loose clips, failed adhesive, damaged supports) Protect surrounding cabinetry, countertops, and flooring Disconnect plumbing as needed (drain and supply lines if required) 2. Sink Removal (If Necessary) Carefully detach sink from existing mounts Remove old adhesive, silicone, and failed brackets/clips Clean and prep mounting surfaces (sink lip and countertop underside) 3. Structural Support Installation Install new mechanical support system as needed: Heavy-duty sink clips/brackets and/or Wood support framing (2x4 cleats or custom bracing inside cabinet) and/or Adjustable sink support system (if required) Ensure sink is fully supported independent of adhesive 4. Reinstallation & Securing Reinstall sink and align properly with countertop opening Apply high-quality waterproof silicone adhesive/sealant Secure sink using new clips and/or support system Verify proper pitch and alignment for drainage 5. Plumbing Reconnection Reconnect drain assembly, P-trap, and supply lines Check for leaks and proper function Test garbage disposal (if applicable) 6. Cleanup & Final Inspection Remove debris and old materials Clean work area inside cabinet and surrounding surfaces Final stability check (load test sink) Verify watertight seal and proper operation Exclusions Replacement of sink or countertop (unless quoted separately) Major plumbing repairs beyond standard reconnection Water damage repair, cabinet replacement, or mold remediation Disposal replacement or new fixture installation (available as add-on)
$407.87/each
-
-
Exterior
-
Ring Doorbell Installation | $296Full Job: $296 plus tax | $50 reservation fee customer to provide doorbell Remove old doorbell from front door, install new customer provided ring door bell. Install using standard build techniques and processes. (Bid rate) Labor only 120 Mins.
$296.00/each -
Remove and replace Exterior light fixtures$50 reservation fee, Replace up to 3 wall mounted light fixtures. does not include fixtures. Cost may change due to job and site conditions.
$296.00/total -
Install New Exterior door (Labor only)$50 reservation fee, job includes remove existing door trim jamb and door. Install new pre hung customer of contractor supplied door ( extra cost added for door if supplied by contractor) trim and hardware, Does not include painting, painting will be a extra cost to job. This a base cost may change based on site conditions.
$650.00/each -
Prep & Paint exterior door jamb / 1 door opening$50 reservation fee Job includes preparing door jamb for new acrylic primer and paint, two coats of acrylic paint. (Labor only) (does not include fixing rotted wood)
$425.00/each -
Storm Door Install$50 reservation fee, Remove and replace the storm door (customer-supplied door) at the customer-specified location. Install using standard techniques and manufacturer instructions. Painting and framing are separate charges if required. Labor only Full Job: $375 plus tax | $50 reservation fee
$375.00/each
-
-
Electrical
-
Install Recessed Power Outlet Behind Wall-Mounted TVProject Description $50 reservation fee Install a new recessed electrical outlet behind a wall-mounted flat screen TV by extending power from an existing outlet below. Scope Includes Verify existing lower outlet is properly wired and grounded Shut off breaker and confirm power is off Cut opening behind TV for recessed TV outlet box Install code-approved recessed electrical box Run up to 6–8 feet of 14/2 or 12/2 Romex (matching existing circuit) Staple and secure wiring inside wall cavity Install new receptacle and cover plate Tie into existing lower outlet (pigtailed connection) Restore drywall opening as needed (no texture matching or painting included) Test outlet for proper voltage and polarity Clean work area Not Included (Add-Ons) New dedicated circuit from panel Running power across studs (horizontal drilling) Fire blocking modification Texture matching & painting Permit (if required by municipality) ⚡ If Horizontal Drilling / Stud Boring Required Add $75 – $150 🧱 If Drywall Patching Needed (larger access hole) Add $75 – $125 Painting not included. 🔌 If Adding Cable Management Kit (Power + HDMI pass-through kit installed) $375 – $475 labor only Material Allowance (If Supplying) Recessed outlet kit: $40 – $65 Romex (up to 10 ft): $15 – $25 Outlet + plate: $10 – $20 Typical material total: $75 – $125
$296.00/each -
✅ Standard Single-Pole Switch (Labor 290.76 up to 3 + Standard Switch)Scope of Work Light Switch Replacement $50 reservation fee Service: Remove and Replace Standard 120V Wall Light Switch Description of Work: Woods Handyman Service will safely remove the existing wall switch and install a new customer-approved replacement switch in the same location. Includes: Shut off and verify power at breaker panel Remove existing switch and wall plate Inspect wiring condition (visual inspection only) Install new single-pole switch Secure switch to electrical box Install new standard white wall plate Restore power and test functionality Clean work area Assumptions: Existing wiring is copper and in good condition Electrical box is secure and properly sized Standard single-pole switch (controls one light from one location) No code upgrades required Exclusions: 3-way or 4-way troubleshooting (unless specified) New wiring or circuit installation Electrical panel work Smart switch setup requiring Wi-Fi configuration Drywall repair if box is loose or damaged Additional switch 85.00 ea.
$290.76/total -
Standard Switch/Outlet Install (up to 3) | $375Scope of Work Electrical Outlet Replacement $50 reservation fee Service: Remove and Replace Standard 120V Wall Outlet (Receptacle) Description of Work: Woods Handyman Service will remove the existing electrical outlet and install a new customer-approved replacement outlet in the same location. Includes: Turn off and verify power at breaker panel Remove existing outlet and wall plate Inspect wiring condition (visual only) Reconnect existing wiring to new receptacle Secure outlet in electrical box Install new wall plate (standard white included) Restore power and test outlet for proper operation Clean work area Assumptions: Existing wiring is in good condition Electrical box is properly secured and sized No aluminum wiring No code upgrades required Standard 120V single receptacle replacement (not GFCI unless specified) GFCI add $50.00 Exclusions: New circuit installation Running new wire Electrical panel work Troubleshooting extensive electrical issues Drywall repair if box is loose or damaged 💵 Flat Rate Pricing (Salt Lake City / Utah County) ✅ Standard Outlet Replacement (Labor + Standard Outlet) $375.00 Replace Electrical Box (if needed): +$50.00 After-hours / Emergency Service: +$50–$100
$375.00/total
-
